Maintaining the proper temperature of a chemical inside a polyethylene storage tank is often critical for safe storage. For example, sodium hydroxide and caustic soda need to maintain certain temperatures to prevent crystallization.
For polyethylene chemical tanks, heating pads and insulation can maintain the specific temperature of the chemical you’re storing—even when your chemical tank is exposed to low air temperatures.
To give you one of the most reliable temperature control systems in the industry, Poly Processing provides a state-of-the-art heating system and controller for your chemical storage tank.
Our chemical tank heating system consists of tank heating pads and a temperature controller with a thermostat. The quantity and size of the silicone heating pads depends on the size of the tank, the required chemical temperature, and ambient environmental conditions.
Poly Processing Company, along with our heat maintenance system suppliers, has designed a Digital 2XTC Tank Heating System for our product line. The heat pads and controller are factory installed and tested before shipping to assure an easy installation on site.
Let’s take a look at the Digital 2XTC Tank Heating Controller.
The 2XTC Tank Heating Controller is the one of the most complete and versatile tank heating controllers in existence. It is specifically designed for heating systems that need process temperature control with high limit temperature protection. And as a digital controller, it provides significant advantages over standard analog boxes.
SPX Tank Heating Systems are designed for temperature maintenance on Poly Processing’s polyethylene tanks. SPX Tank Heating Systems maintain the desired product temperature, not to exceed 100F. Each heating system consists of tank heating pads and a temperature controller. The controller comes in a NEMA 4X / IP66 polycarbonate enclosure so that it can be safely used indoors or outdoors.
The heating controller is convenient to monitor, whether you’re up close or away from the chemical storage tank. High-visibility LED lights indicate the process sensor temperature, over-limit sensor temperature, and heater current using a simple settings menu. Alarms and system status can be paired with remote monitoring systems, so you can monitor the temperature or current to make sure they haven't gone out of acceptable range. Two controllers may be used for larger tanks or for redundant systems if necessary.
Download the SPX Tank Heating System installation, operation, and maintenance manual
The 2XTC heating controller comes with industry-leading features that other systems don’t match, including:
The 2XTC is a digital heating controller, which provides important advantages over other polyethylene tanks that are still using analog controllers:
When it comes to protecting your stored chemicals from low temperatures and overheating in a polyethylene chemical storage tank, it's hard to do better than the digital heating controller that Poly Processing provides. HTD Heat Trace’s 2XTC is the one of best controllers in the industry, giving you peace of mind that your chemicals are within the proper temperature range.
Get more information on the 2XTC controller and tank heating system — download the spec sheet or talk to a Poly Processing tank specialist with your questions.